One of the most devastating things that can happen to a home owner is a house fire. And more often than not, you would have to either replace or attempt to restore fire or smoke damaged items. If you choose to simply clean the items, you must make sure that you clean them thoroughly before you make use of them again. While it may be quite a chore to try and restore most fire damaged items in the house, clothing is an almost entirely different story. Cleaning smoke damaged clothing is a very simple thing to do, and is most dependent on when you decide to wash them, and with what cleaning agent you employ to wash them.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature.
Showing posts with label prevention. Show all posts
Showing posts with label prevention. Show all posts
Friday, January 18, 2008
Venting Is A Good Thing To Keep Mold At Bay
If you do not have a ceiling exhaust fan installed in your bathrooms, it will not be long before you realize why you need one. There are so many reasons that they are a necessary item. Have you ever tried to blow dry your hair in a steamy bathroom? If you could see yourself in the mirror it might help, but with all that moisture in the air it’s not likely. Then there are also those unspeakable bathroom odors that almost anyone would rather not speak of, but they go along with the natural procession of things and the exhaust fan is a marvelous invention, if only to dispel an unpleasantness that remains even after its last occupant is gone!
A bad hair-do will be the least of your worries if the moisture problem is not corrected.
A consistently steamy bathroom can result in shrinking the edges of wallpaper and peeling paint. These minor complications are bad enough in themselves, but with prolonged exposure, it can actually cause wooden window frames to swell, preventing them from opening easily, or not at all. Other wood, such as door frames, crown molding, and baseboards can swell and be damaged also, and then there is the scary mold that can grow on the ceiling and walls. It can be much cheaper in the long run to install exhaust fans rather than wait around for more costly repairs to show up later. Rest assured, any unresolved water problems in a home will not result in any thing good.
The exhaust fan is something that is rarely overlooked in newer homes, but not so in older ones. If you are a do it yourselfer, this could be a project you can handle. However, it does involve some electrical wiring, cutting holes through your ceiling and possibly through your outer wall in the attic. Home improvement stores have them with or without lights. If there is any existing light fixture in the ceiling of your bathroom, it is an advantage. If not, it will be a little more involved. In any case, if you are not familiar with electrical wiring and reciprocating saws, then hiring someone to install it for you might be the easiest and safest option. Saving money doing it yourself is great if your work is done properly. Just remember it is only home improvement if you are fixing old problems and not creating new ones!
A bad hair-do will be the least of your worries if the moisture problem is not corrected.
A consistently steamy bathroom can result in shrinking the edges of wallpaper and peeling paint. These minor complications are bad enough in themselves, but with prolonged exposure, it can actually cause wooden window frames to swell, preventing them from opening easily, or not at all. Other wood, such as door frames, crown molding, and baseboards can swell and be damaged also, and then there is the scary mold that can grow on the ceiling and walls. It can be much cheaper in the long run to install exhaust fans rather than wait around for more costly repairs to show up later. Rest assured, any unresolved water problems in a home will not result in any thing good.
The exhaust fan is something that is rarely overlooked in newer homes, but not so in older ones. If you are a do it yourselfer, this could be a project you can handle. However, it does involve some electrical wiring, cutting holes through your ceiling and possibly through your outer wall in the attic. Home improvement stores have them with or without lights. If there is any existing light fixture in the ceiling of your bathroom, it is an advantage. If not, it will be a little more involved. In any case, if you are not familiar with electrical wiring and reciprocating saws, then hiring someone to install it for you might be the easiest and safest option. Saving money doing it yourself is great if your work is done properly. Just remember it is only home improvement if you are fixing old problems and not creating new ones!
Replacing Molded Carpet
For a homeowner there is nothing more unsightly then mold. Even worse, still, is mold growing on your carpet. The first thing one usually decides to do upon discovering mold is to have it thoroughly cleaned. However, this can be far more difficult than it actually sounds. One of the biggest problems you can face may be that the mold isn’t simply on your carpet. It may also be on the padding beneath the carpet, and this could just cause even more damage than the original carpet. And if this is the case, the whole carpet should be removed. The padding should also be removed and thrown away.
Fortunately, removing carpet is a relatively simple task that can be achieved by someone who has never worked with carpet in their life. All the process takes is a little bit of common sense, and perhaps some patience.
The first thing you should do when removing the carpet is to take up the moldings that go all around the floor and to begin to take the doors from off of the hinges. The only real purpose behind taking the doors off of the hinges is to create more space for you to work with as you take the old carpet out of the floor and put the new carpet in its place. It is probably a good idea to employ the use of a utility knife to cut the carpet up into strips. Cutting the carpet will make the task of taking the carpet out much easier. However, when using the knife, it is very important to be careful, as you might have a hardwood floor underneath and it would be a tragedy to cut it.
You should always start at one end of the room and to pull the carpet from off of the tackless strips and to roll it up neatly. You can install new tackless strips later on if you make the decision to put a new carpet in later. You should install them around the perimeter of the room you’re working in, but make sure that you do not put them in front of any doorways. There needs to also be at least one half inch of space between the stips and the wall. The tack points should be facing the wall.
You should check the floor underneath for mold damage. It may be refinished if damage is found.
You won’t have to reinstall carpet where the old carpet had been, but only depending on the condition of the floor.
Fortunately, removing carpet is a relatively simple task that can be achieved by someone who has never worked with carpet in their life. All the process takes is a little bit of common sense, and perhaps some patience.
The first thing you should do when removing the carpet is to take up the moldings that go all around the floor and to begin to take the doors from off of the hinges. The only real purpose behind taking the doors off of the hinges is to create more space for you to work with as you take the old carpet out of the floor and put the new carpet in its place. It is probably a good idea to employ the use of a utility knife to cut the carpet up into strips. Cutting the carpet will make the task of taking the carpet out much easier. However, when using the knife, it is very important to be careful, as you might have a hardwood floor underneath and it would be a tragedy to cut it.
You should always start at one end of the room and to pull the carpet from off of the tackless strips and to roll it up neatly. You can install new tackless strips later on if you make the decision to put a new carpet in later. You should install them around the perimeter of the room you’re working in, but make sure that you do not put them in front of any doorways. There needs to also be at least one half inch of space between the stips and the wall. The tack points should be facing the wall.
You should check the floor underneath for mold damage. It may be refinished if damage is found.
You won’t have to reinstall carpet where the old carpet had been, but only depending on the condition of the floor.
Protecting Your Personal Property From Mold
It is well known that there is no such thing as a “mold free” environment. It is in the air we breathe, on our furniture, on our clothes, and definitely in our homes. It is simply a matter of whether or not the mold actually starts to grow on our property that determines if there is a problem. Mold likes to grow in wet environments, so wet kitchen floors are potential breeding grounds, as well as un-dried dishes in your kitchen.
Even items that you might use to take care of an infant with are susceptible to mold contamination. Things like baby clothes and even food are targets for contamination. Baby bottles are no longer just round cylinders, as they used to be. To accommodate twenty first century styles, plastic companies that produce these products have changed to using several different odd shapes and designs which make the bottles more difficult to clean in some cases. If these bottles are not completely dry and are placed back into a refrigerator, they can become a veritable breeding ground for mold and other bacteria. However, there is a way to prevent this. After drying the bottle as best you can, simply place the bottle into the freezer and let it sit in there until you are ready to use it again. These cold temperatures are, for lack of a better word, unfit for mold to grow in. This is the same reason why it is popular to put common items like flour, cornmeal, and sugar in the freezer.
Clothes that have not been attended to in a long amount of time that gather in the back of the closet are hotbeds for molds. It is important that you do not pack clothes close together, as it can cut off air circulation in the closet and that will create warmth which is essential in order for mold to survive. If there is warmth, and if there is enough humidity in your home, this can cause further mold infestation. A good way to prevent mold in this area is to install a vent inside of the closet.
Damp and dirty clothing left in a bathroom closet or hamper is another breeding ground for mold. The same goes for damp carpets, as well. While having a carpet in the bathroom is not a good idea when mold is involved, it can be worsened with wet clothing. It’s important that you take the laundry out of the closet or hamper constantly.
Even items that you might use to take care of an infant with are susceptible to mold contamination. Things like baby clothes and even food are targets for contamination. Baby bottles are no longer just round cylinders, as they used to be. To accommodate twenty first century styles, plastic companies that produce these products have changed to using several different odd shapes and designs which make the bottles more difficult to clean in some cases. If these bottles are not completely dry and are placed back into a refrigerator, they can become a veritable breeding ground for mold and other bacteria. However, there is a way to prevent this. After drying the bottle as best you can, simply place the bottle into the freezer and let it sit in there until you are ready to use it again. These cold temperatures are, for lack of a better word, unfit for mold to grow in. This is the same reason why it is popular to put common items like flour, cornmeal, and sugar in the freezer.
Clothes that have not been attended to in a long amount of time that gather in the back of the closet are hotbeds for molds. It is important that you do not pack clothes close together, as it can cut off air circulation in the closet and that will create warmth which is essential in order for mold to survive. If there is warmth, and if there is enough humidity in your home, this can cause further mold infestation. A good way to prevent mold in this area is to install a vent inside of the closet.
Damp and dirty clothing left in a bathroom closet or hamper is another breeding ground for mold. The same goes for damp carpets, as well. While having a carpet in the bathroom is not a good idea when mold is involved, it can be worsened with wet clothing. It’s important that you take the laundry out of the closet or hamper constantly.
Mold Can Destroy Citrus Crops Quickly
Anyone who works with citrus crops knows that they can take a very long time to grow and cultivate. But, perhaps even more frustrating than waiting on the crops to have to grow and ripen are the various molds and fungi that could afflict the crops. The two most prominent molds that affect a citrus crop post-harvest are blue mold, and green mold. These two are caused by the single mold Penicillium digitatum. All citrus fruit growing regions have this mold and it is most certainly a serious threat to the crops.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Easy To Follow Tips To Waterproof Your Deck
One thing that always makes a homeowner proud is a newly finished deck. And for a few months it may look very good. However, if you have not had your deck waterproofed, your deck could end up being a very ugly addition to your home. If you want your deck to be around for a long time, then waterproofing it is absolutely essential. Without waterproofing, than cracking and warping can occur, and that means your deck will not be very far from destruction. Fortunately, waterproofing doesn’t have to be very difficult.
The very first thing to do to waterproof your deck is to give it a very thorough cleaning. Now, usually the best time for one to start waterproofing the deck is to start right after you build the deck. However, cleaning it off is the first thing to do if you do not have the option of starting right away. You should start the cleaning process is to sweep off any and all debris that may be on the deck. Then remove any furniture that may be on the deck. Once all of the debris and furniture is removed, you can go to your local hardware store and purchase a cleaning solution. You can employ the use of a pump sprayer to apply the cleaning agent to the deck. It will eventually start to foam, and at that point you should start to scrub the deck with a scrub brush that has stiff bristles. The bristles will give a little extra muscle to remove any stubborn stains that may be left on there, especially ones from soot or grease. After scrubbing, rinse the deck off as thoroughly as possible with a garden hose. It’s a good idea to wear eye protection of some kind in order to keep any grit from the deck out of your eyes.
Now, after the deck has had time to dry, there are two options available. If the wood is more or less new, you have the option to put a new stain on it. If you do not want a new stain, then now is the time to apply water sealant onto the deck in order to protect the wood. Applying the sealant is best done with a sprayer or roller. The deck should dry completely after a few days, and then it should be alright to walk on it without worrying about damaging any of the sealant.
The very first thing to do to waterproof your deck is to give it a very thorough cleaning. Now, usually the best time for one to start waterproofing the deck is to start right after you build the deck. However, cleaning it off is the first thing to do if you do not have the option of starting right away. You should start the cleaning process is to sweep off any and all debris that may be on the deck. Then remove any furniture that may be on the deck. Once all of the debris and furniture is removed, you can go to your local hardware store and purchase a cleaning solution. You can employ the use of a pump sprayer to apply the cleaning agent to the deck. It will eventually start to foam, and at that point you should start to scrub the deck with a scrub brush that has stiff bristles. The bristles will give a little extra muscle to remove any stubborn stains that may be left on there, especially ones from soot or grease. After scrubbing, rinse the deck off as thoroughly as possible with a garden hose. It’s a good idea to wear eye protection of some kind in order to keep any grit from the deck out of your eyes.
Now, after the deck has had time to dry, there are two options available. If the wood is more or less new, you have the option to put a new stain on it. If you do not want a new stain, then now is the time to apply water sealant onto the deck in order to protect the wood. Applying the sealant is best done with a sprayer or roller. The deck should dry completely after a few days, and then it should be alright to walk on it without worrying about damaging any of the sealant.
Yes You Can Detect Mold With Light
There is almost nothing that plagues one’s house quite as badly as the pest called mold. Mold is usually very easy to find, because more often than not it is brightly colored and absolutely hideous. However, not all molds are as easy to detect. Some mold is actually very well hidden from the naked eye. There are a few types of molds, such as members of Penicillium sp. and Aspergillus sp. groups, which are capable of being next to invisible. However, it is not impossible to find these molds. In fact, you can use one of the simplest objects in your house to your advantage. A flashlight.
While it may sound simplistic enough to use a flashlight to find mold, there is a trick to it. Using the flashlight will not help you to detect the mold unless you shine it in the right way. You cannot simply shine the light directly on the surface where you suspect mold, because you will most likely see absolutely nothing. Instead, you must shine the light along the surface. Doing this will make the difference between getting rid of the mold or just using up battery power for nothing.
Mold is very tricky because it likes to hide in little areas that are difficult to get to without tools. One of these places is inside wooden paneling. Using the light along the paneling can show whether or not the paneling is buckled and in need of removal or replacement. There may be drywall or perhaps even a cavity behind the drywall because some people like to replace water damage drywall with paneling.
Moisture does not exactly mean that there is mold in the area, but this does not mean that you should neglect to look in areas where there is moisture. This is because it will help you realize that mold has the potential to grow in almost every single area in your home. It will also teach you that the mold can especially grow in the places you cannot see it. It is very much like the phrase “knowing is half of the battle.” In this case, knowing can make the difference between a house devoid of mold and a house infested with mold. If you do not know how to find mold, then you cannot combat it.
Do not just look for the black mold that you may constantly hear about. You should know that some black molds are merely cosmetic and if you don’t have the mold tested to confirm whether or not it is dangerous, you could end up wasting thousands of dollars.
While it may sound simplistic enough to use a flashlight to find mold, there is a trick to it. Using the flashlight will not help you to detect the mold unless you shine it in the right way. You cannot simply shine the light directly on the surface where you suspect mold, because you will most likely see absolutely nothing. Instead, you must shine the light along the surface. Doing this will make the difference between getting rid of the mold or just using up battery power for nothing.
Mold is very tricky because it likes to hide in little areas that are difficult to get to without tools. One of these places is inside wooden paneling. Using the light along the paneling can show whether or not the paneling is buckled and in need of removal or replacement. There may be drywall or perhaps even a cavity behind the drywall because some people like to replace water damage drywall with paneling.
Moisture does not exactly mean that there is mold in the area, but this does not mean that you should neglect to look in areas where there is moisture. This is because it will help you realize that mold has the potential to grow in almost every single area in your home. It will also teach you that the mold can especially grow in the places you cannot see it. It is very much like the phrase “knowing is half of the battle.” In this case, knowing can make the difference between a house devoid of mold and a house infested with mold. If you do not know how to find mold, then you cannot combat it.
Do not just look for the black mold that you may constantly hear about. You should know that some black molds are merely cosmetic and if you don’t have the mold tested to confirm whether or not it is dangerous, you could end up wasting thousands of dollars.
You Can Prevent Basement Mold Problems
It is a well known fact that old basements and mold damage go together like peanut butter and jelly. However, to new home owners it may not be as well known just how these damages are caused. And it may be even lesser well known how to combat the damage. Now, water damage, musty smells, and interior wall damage may be very obvious problems, but not all of the problems are as apparent. But they can indeed be removed.
Now, it is a very popular thing to employ your basement as a laundry room and it is usually a very efficient place to do this. However, you could be making your clothing a target for one of the biggest causes of home water damage: mold. Wet clothing is a veritable breeding ground for mold. If you throw in a basement, which is usually the most humid area you can find in a house, then the results could be disastrous. The reason is that mold likes to grow in places that are wet and humid. And if your basement does not have a good vent system, then humidity will build up from the machines running. This means that if the clothes are unattended for a certain period of time, you may find yourself buying some new clothes soon.
Now, while it can be difficult to prevent mold, it is not impossible. One way that you can prevent this from happening is to keep from blocking vents. This will allow for a better air flow and, as a result, the humidity will drop and keep your clothing safer. You should also make sure that any hot air with nowhere to go must be dealt with immediately. This heat has the potential to cause damage to any wood in the basement, and the damaged wood could create crevices for condensation to build up from humidity. This condensation and heat is almost guaranteed to start a mold colony. Installing an exhaust vent can be very beneficial to the remediation of this problem. It is also important that you keep doors that lead outside of your home closed as often as possible. This will help prevent more moisture from entering your house, and, therefore your basement. You can also invest in a dehumidifier. A dehumidifier and a good ventilation system should be a major help in keeping your basement mold free.
Now, it is a very popular thing to employ your basement as a laundry room and it is usually a very efficient place to do this. However, you could be making your clothing a target for one of the biggest causes of home water damage: mold. Wet clothing is a veritable breeding ground for mold. If you throw in a basement, which is usually the most humid area you can find in a house, then the results could be disastrous. The reason is that mold likes to grow in places that are wet and humid. And if your basement does not have a good vent system, then humidity will build up from the machines running. This means that if the clothes are unattended for a certain period of time, you may find yourself buying some new clothes soon.
Now, while it can be difficult to prevent mold, it is not impossible. One way that you can prevent this from happening is to keep from blocking vents. This will allow for a better air flow and, as a result, the humidity will drop and keep your clothing safer. You should also make sure that any hot air with nowhere to go must be dealt with immediately. This heat has the potential to cause damage to any wood in the basement, and the damaged wood could create crevices for condensation to build up from humidity. This condensation and heat is almost guaranteed to start a mold colony. Installing an exhaust vent can be very beneficial to the remediation of this problem. It is also important that you keep doors that lead outside of your home closed as often as possible. This will help prevent more moisture from entering your house, and, therefore your basement. You can also invest in a dehumidifier. A dehumidifier and a good ventilation system should be a major help in keeping your basement mold free.
Saving Up Water and Other Supplies For Hurricanes
The most important thing that you need to worry about if you plan on sticking out a hurricane in your home instead of evacuating is just how much clean water you have to drink. If you live alone and there will be no one staying with you, it will be a lot easier for you to prepare to stay at home during the storm, but if you have a family that will stay with you, you will have to gather a lot more supplies. You should also have a good supply of non-perishable food (preferably foods that you do not have to cook and are ready to eat out of the package), batteries for anything you think you will need, flashlights, a hand-crank radio, and blankets.
The hand-crank radio will ensure that you have the capability to hear what is going on in the outside world during the storm, even if your electricity does go out. This will let you know what your local, state, and federal government is doing at this time.
As far as your water supply, if you have just moved to an area that is prone to hurricane damage, you should start saving up water as soon as you get moved into your new home. You can do this by re-using milk jugs after you have rinsed them out and storing them in a safe, convenient place in your home. You should keep at least one gallon for yourself and for each person you will have with you during the storm to use each day you expect the storm to last. Saving up a week’s worth of water in this way is advised and will ensure that you do not run out of water.
While the storm rages outside, do not drink water from your faucet because of the fact that it may be contaminated with anything from bacteria, sea water, and leaves to sewage and other hazardous waste. You can boil water from your faucet if you run out of the supply that you have saved, but it is much better to make sure that you have enough water put back so that you do not have to do this. Boiling water does not remove all impurities or harmful materials, especially if it has been contaminated with chemicals.
You can also buy some water purification tablets from some department and outdoor supply stores. Anyone who hikes or camps purchases these if they plan on going into an area of wilderness where clean water is not always able to be obtained.
The hand-crank radio will ensure that you have the capability to hear what is going on in the outside world during the storm, even if your electricity does go out. This will let you know what your local, state, and federal government is doing at this time.
As far as your water supply, if you have just moved to an area that is prone to hurricane damage, you should start saving up water as soon as you get moved into your new home. You can do this by re-using milk jugs after you have rinsed them out and storing them in a safe, convenient place in your home. You should keep at least one gallon for yourself and for each person you will have with you during the storm to use each day you expect the storm to last. Saving up a week’s worth of water in this way is advised and will ensure that you do not run out of water.
While the storm rages outside, do not drink water from your faucet because of the fact that it may be contaminated with anything from bacteria, sea water, and leaves to sewage and other hazardous waste. You can boil water from your faucet if you run out of the supply that you have saved, but it is much better to make sure that you have enough water put back so that you do not have to do this. Boiling water does not remove all impurities or harmful materials, especially if it has been contaminated with chemicals.
You can also buy some water purification tablets from some department and outdoor supply stores. Anyone who hikes or camps purchases these if they plan on going into an area of wilderness where clean water is not always able to be obtained.
Rooms The Most At Risk For Mold
There are a number of places in your home that mold may start to grow and theoretically, they can grow anywhere in the house, but there are some areas that are more at risk than others. Any room in the house where there is an excess amount of moisture going through it every single day is particularly at risk for mold growth and this risk should not be underestimated. A casual inspection every few weeks or every month should be done, if not due to the cost of having mold removed from the house, but also due to the health effects that mold can cause if it is let to thrive.
The very first room that you need to be concerned with is the bathroom. This is the mold center of the house 99 percent of the time, since more water passes in and out of this room than any other. Every member of your family takes a bath or a shower every day (at least, they should) and this means gallons upon gallons of water moving to and from the room, either in the form of steam or liquid. The liquid form is the most dangerous to the floor, especially if the floor is not waterproofed. This will cause not only mold growth, but also water damage to the floor joists that can cause it to rot over time. Long term damage such as this has been known to cause toilets and tubs to fall through the floor, resulting in an expense that most people do not have the money to pay for immediately.
The steam produces a problem for the ceiling and upper walls if there is nowhere for it to escape to. Most building codes require that there be a window or an exhaust fan installed in the bathroom, but you should really have both of these. The fan will remove the steam from the room and direct it outside where it will do no damage to anything.
The next room you should take care of is the kitchen. Whether you have a dishwasher or do your dishes by hand, there is always a chance that water will be spilled onto the floor and seep into an area that you cannot completely dry. This is usually because your floor is not completely sealed or has cracks in the flooring. Mold can also grow due to the steam coming from your stove, but this problem can be solved if you have an exhaust vent installed over it.
The very first room that you need to be concerned with is the bathroom. This is the mold center of the house 99 percent of the time, since more water passes in and out of this room than any other. Every member of your family takes a bath or a shower every day (at least, they should) and this means gallons upon gallons of water moving to and from the room, either in the form of steam or liquid. The liquid form is the most dangerous to the floor, especially if the floor is not waterproofed. This will cause not only mold growth, but also water damage to the floor joists that can cause it to rot over time. Long term damage such as this has been known to cause toilets and tubs to fall through the floor, resulting in an expense that most people do not have the money to pay for immediately.
The steam produces a problem for the ceiling and upper walls if there is nowhere for it to escape to. Most building codes require that there be a window or an exhaust fan installed in the bathroom, but you should really have both of these. The fan will remove the steam from the room and direct it outside where it will do no damage to anything.
The next room you should take care of is the kitchen. Whether you have a dishwasher or do your dishes by hand, there is always a chance that water will be spilled onto the floor and seep into an area that you cannot completely dry. This is usually because your floor is not completely sealed or has cracks in the flooring. Mold can also grow due to the steam coming from your stove, but this problem can be solved if you have an exhaust vent installed over it.
Renter’s Rights Concerning Mold
Even though we know that mold exists everywhere around us, having excess amounts of it in our homes or workplaces can be hazardous to our health and should be taken care of as soon as it is noticed. If you are renting an apartment or a house and discover a mold issue on the property, you need to take this up with your landlord as soon as possible. There are a number of rights that a renter has and being guaranteed a safe and sanitary living space is most certainly one of them.
As long as the mold issue was not caused by you, your landlord is responsible for having any removal done. You can also hold the landlord responsible for any medical bills that you may incur due to being exposed to the mold, but depending upon your relationship with your landlord, having them take care of the problem may be enough for you. If your landlord has been good to you throughout the course of your stay on his or her property and you wish to continue renting from them after the incident is over, it could be in your best interest to not cause too much trouble over the issue. If you feel that your landlord has neglected the property and has allowed it to fall into disrepair and has repeatedly ignored your request for maintenance and mold removal, then seek the maximum the law will grant you under the circumstances. You should seek the compensation that is right for your situation.
The first thing that you need to do, no matter how much you trust your landlord, is send him or her a certified letter stating that mold exists on the property along with proof of this. You can obtain this proof most easily by performing a do-it-yourself mold testing kit and sending in the results or you can hire a mold inspector to look at the property.
If you do not receive a response from your landlord, a second letter should be sent in the same manner and state that you will withhold your rent until the matter is solved. This should get the reaction that you want, but sometimes even this is not enough.
The last thing that you need to do if you do not feel that your landlord has responded in a timely fashion is to send yet another certified letter and state your intent to move and bring legal action within a certain amount of days unless the problem is taken care of immediately. At this point, charging your landlord for any medical bills you may have incurred that are directly related to mold exposure is completely ethical and acceptable.
As long as the mold issue was not caused by you, your landlord is responsible for having any removal done. You can also hold the landlord responsible for any medical bills that you may incur due to being exposed to the mold, but depending upon your relationship with your landlord, having them take care of the problem may be enough for you. If your landlord has been good to you throughout the course of your stay on his or her property and you wish to continue renting from them after the incident is over, it could be in your best interest to not cause too much trouble over the issue. If you feel that your landlord has neglected the property and has allowed it to fall into disrepair and has repeatedly ignored your request for maintenance and mold removal, then seek the maximum the law will grant you under the circumstances. You should seek the compensation that is right for your situation.
The first thing that you need to do, no matter how much you trust your landlord, is send him or her a certified letter stating that mold exists on the property along with proof of this. You can obtain this proof most easily by performing a do-it-yourself mold testing kit and sending in the results or you can hire a mold inspector to look at the property.
If you do not receive a response from your landlord, a second letter should be sent in the same manner and state that you will withhold your rent until the matter is solved. This should get the reaction that you want, but sometimes even this is not enough.
The last thing that you need to do if you do not feel that your landlord has responded in a timely fashion is to send yet another certified letter and state your intent to move and bring legal action within a certain amount of days unless the problem is taken care of immediately. At this point, charging your landlord for any medical bills you may have incurred that are directly related to mold exposure is completely ethical and acceptable.
Removing Mold And The Equipment You Need
The process of removing mold from your home can be a long and tedious one, depending on how large the infection is and whether you are choosing to take care of the problem yourself or have a professional take care of the problem for you. The most efficient solution for those who have the money, but not a lot of time is to have a professional mold remediation company remove the mold and all affected materials from the property, but not everyone can afford to have this done. So, the option of removing the mold yourself is available, but only for those who have the knowledge and proper equipment to do so.
You can perform most mold removal projects on your own, but projects that require you remove material from walls, floors, or ceilings are best undertaken by those who have experience in interior remodeling and renovation. Scrubbing mold off of certain areas of the home is fairly easy and is an efficient way to deal with a mold problem, as long as the mold has not embedded itself into the surface. Drywall is particularly at risk for having to be replaced if the mold infection becomes too extensive.
You will need buckets of water and the cleaning solution of your choice, along with sponges, rags, or whatever you decide to use while doing the cleanup. Wearing latex or rubber gloves is recommended for this, since coming into contact with mold can cause skin rashes. Heavy trash bags will be needed to dispose of waste in.
Something else you may want to purchase is a respirator, particularly if you are going to be opening up any walls and releasing mold spores into the air. An N-95 respirator can be purchased from your local hardware store and is the lowest level of protection available. If you want more protection than that, you can purchase a half or full face mask respirator with a HEPA filter attached to it.
Wearing disposable protective clothing is also recommended if the mold problem is extensive in any area of the house. Protective shoe covers should also be worn and duct tape used to seal up the gaps in the suit on the wrists and ankles.
Something else you may want to purchase is an air purifier with a HEPA filter built into it. This will help clean the air in your home and remove almost anything you can think of, including mold spores stirred up by the removal, and your health will improve. Depending on your financial situation, you may not be able to afford this, but if you can afford it, purchasing one of these air purifiers will be one of the best health investments you can make.
You can perform most mold removal projects on your own, but projects that require you remove material from walls, floors, or ceilings are best undertaken by those who have experience in interior remodeling and renovation. Scrubbing mold off of certain areas of the home is fairly easy and is an efficient way to deal with a mold problem, as long as the mold has not embedded itself into the surface. Drywall is particularly at risk for having to be replaced if the mold infection becomes too extensive.
You will need buckets of water and the cleaning solution of your choice, along with sponges, rags, or whatever you decide to use while doing the cleanup. Wearing latex or rubber gloves is recommended for this, since coming into contact with mold can cause skin rashes. Heavy trash bags will be needed to dispose of waste in.
Something else you may want to purchase is a respirator, particularly if you are going to be opening up any walls and releasing mold spores into the air. An N-95 respirator can be purchased from your local hardware store and is the lowest level of protection available. If you want more protection than that, you can purchase a half or full face mask respirator with a HEPA filter attached to it.
Wearing disposable protective clothing is also recommended if the mold problem is extensive in any area of the house. Protective shoe covers should also be worn and duct tape used to seal up the gaps in the suit on the wrists and ankles.
Something else you may want to purchase is an air purifier with a HEPA filter built into it. This will help clean the air in your home and remove almost anything you can think of, including mold spores stirred up by the removal, and your health will improve. Depending on your financial situation, you may not be able to afford this, but if you can afford it, purchasing one of these air purifiers will be one of the best health investments you can make.
Mold Prevention All Over the House
Mold growing in your home can be a serious problem not only for you, but also for the building itself. The negative health effects it can have on you, your family, and your pets are bad enough by themselves, but when you add the structural damage it can do, what it costs to have it removed, and how unsightly it can be, it is a nightmare for any homeowner to deal with. There are a number of places in your home that are at risk for mold growth and you should do a casual inspection of these areas often, since it can start to grow in about 48 hours.
The bathroom is the worst area of the home at risk for mold because this room sees so much water going in and out of it every day. Hopefully everyone in your home takes a bath or a shower at least once a day and if they do, then this is somewhere around or even over a hundred gallons a day. Steam collects and becomes soaked up by the ceiling and will cause mold to grow there over time. Ceilings have been known to collapse due to this kind of moisture buildup, so having an exhaust vent installed in the room to let the steam outside into the atmosphere is a good idea. The bathroom floor should also be waterproofed. Hard, non-porous surfaces are not good environments for mold to grow on, but if they get underneath to the wooden sub-floor, they will thrive.
The kitchen is another area of the home at risk and an exhaust vent should be here, too, and preferably located over the stove. This is also an area that needs to have a water tight floor, since it is also a place where spills of liquid happen often. Dishwashers and ice makers in the refrigerator also have a tendency to malfunction if they are old or in disrepair.
Basements have their own humidity problem to deal with most of the time and you can fix this by repairing any water leaks that may be there and installing a dehumidifier can also help. If you do laundry or have an extra bathroom here, an exhaust vent is a must. Replacing window wells and piling more soil around the foundation of your house can help stop water from seeping inside, as well.
The bathroom is the worst area of the home at risk for mold because this room sees so much water going in and out of it every day. Hopefully everyone in your home takes a bath or a shower at least once a day and if they do, then this is somewhere around or even over a hundred gallons a day. Steam collects and becomes soaked up by the ceiling and will cause mold to grow there over time. Ceilings have been known to collapse due to this kind of moisture buildup, so having an exhaust vent installed in the room to let the steam outside into the atmosphere is a good idea. The bathroom floor should also be waterproofed. Hard, non-porous surfaces are not good environments for mold to grow on, but if they get underneath to the wooden sub-floor, they will thrive.
The kitchen is another area of the home at risk and an exhaust vent should be here, too, and preferably located over the stove. This is also an area that needs to have a water tight floor, since it is also a place where spills of liquid happen often. Dishwashers and ice makers in the refrigerator also have a tendency to malfunction if they are old or in disrepair.
Basements have their own humidity problem to deal with most of the time and you can fix this by repairing any water leaks that may be there and installing a dehumidifier can also help. If you do laundry or have an extra bathroom here, an exhaust vent is a must. Replacing window wells and piling more soil around the foundation of your house can help stop water from seeping inside, as well.
Subscribe to:
Posts (Atom)
